Standard -10,0 °C HL
Edit the recorded outside temperature for the winter on,
intended for the heat loss calculation. This value is determined on the basis of
the wind speed and the duration of the average. In addition to the standard
outside temperature according to ISSO publications 51, 53 and 57, a different
outside temperature can also be chosen. However, this is not recommended for
Dutch situations.
|
HL |
ISSO Publication 51 (2017) paragraph 2.6 Design outside conditions
|
ISSO Publication 51 (2012) paragraph 2.1.2 Design outside conditions
|
|
HL |
ISSO Publication 53 (2017) paragraph 2.6 Design outside conditions
|
ISSO Publication 53 (2010, erratum 2012) paragraph 2.1.2 Design outside conditions
|
|
HL |
ISSO Publication 57 (2017) paragraph 2.6 Design outside conditions
|
ISSO Publication 57 (2003, erratum 2012) paragraph 2.2 Design outside conditions
|
CL
Edit the recorded outside temperature for the summer, intended for the cooling load calculation. The selection list consists of the following reference years:
•NEN 5067 1985;
•NEN 5060 ref TO1 very strict;
•NEN 5060 ref TO2 strict;
•NEN 5060 ref TO5 moderate.
Absolute humidity
Standaard 10,00 g/kg CL
This is the maximum
absolute humidity of the outside air in the vicinity of the project and is
intended to calculate the latent cooling load component caused by
infiltration.
|
CL |
ISSO Publication 8 (1985) Chapter 14 Calculation of the cooling load as a result of the infiltration of outside air
|
BS
Select the climate file you want to use in your
calculation. If you have a big calculation, you can choose to apply less dates,
so the calculation will be quicker.
|
|
The end day may not fall before the start day. If this the case is, to be the data inverted to as a negative result to be avoided. | |
|
BS |
ISSO Publication 32 (2011), paragraph 3.1 Climate
| |
|
|
NEN 5060:2008 nl Hygrothermal properties of
buildings – Reference climate data
| |
|
|
NEN-EN-ISO 15927-5:2004/A1:2011 en Data for the design calculation of heat capacity for space heating
| |
BS
Start the climate wizard to
import climate files. These only apply to the building simulation module.
è For more information go to: Importeer klimaatbestanden.
